Tuesday, July 18, 2017

DIY Rotating Metal Tiered Tray Organizer

Hi Remodelaholics! It’s Medina here from Grillo Designs. Last month I shared how to make  mason jar candle holders and today I’m sharing how to make a rustic 3 tiered tray organizer from baking tins and industrial pipes. 
Learn to make your own DIY rotating metal tiered tray organizer using upcycled vintage baking tins. Great for organizing craft supplies and decorating. DIY tiered tray tutorial | vintage upcycle | repurpose

So this year, I’ve had a bit of a love affair with vintage baking tins. I’ve been collecting them since January and it might be getting a little out of control because now and I have a whole  cupboard full of them (much to my hubbys dismay). I’ve repurposed these tins into various items so far  including tart tin coasters and a baking tin planter.

This DIY industrial tiered tray organizer is my latest baking tin project! It looks a little rusty and battered, but that my friends is the beauty of vintage and industrial – the imperfections!

Learn to make your own DIY rotating metal tiered tray organizer using upcycled vintage baking tins. Great for organizing craft supplies and decorating. DIY tiered tray tutorial | vintage upcycle | repurposeHere’s how you can make your own! Watch the video from our YouTube channel and read the written instructions below. 

DIY Industrial Metal Tiered Tray Organizer from Baking Tins

Learn to make your own DIY rotating metal tiered tray organizer using upcycled vintage baking tins. Great for organizing craft supplies and decorating. DIY tiered tray tutorial | vintage upcycle | repurpose

This post contains affiliate links for your convenience; learn more about how this helps Remodelaholic and read our full disclosure policy here

Materials used:

  • lazy Susan mechanism (255mm/10″)
  • 5 x  1/2 ” pipe flanges
  • 1 x 1/2″ cap end
  • 3 x 1/2″ 150mm iron pipes
  • strong, fast adhesive appropriate for use on metal (like this one)
  • 3 x baking tins- I used  9″, 6″ and 4″ baking tins
  • Rivet gun and rivet screws (various sizes) 
  • Electric drill and drill piece

Diy Tiered Baking Tin Stand

Industrial Metal Baking Tin Tiered Tray Instructions

STEP ONE: Attach the lazy susan turntable mechanism

First you need add the lazy Susan mechanism to the baking tin that will become your  base for the tiered stand (use the largest of the three bakings tins ). This is the lazy susan mechanism I used and can be bought here.

Tutorial For Diy Tiered Stand

Place the lazy susan mechanism at the center of your baking tin, mark and drill holes with a drill.

Industrial Tiered Stand From Baking Tins Grillo Designs 1Industrial Tiered Stand From Baking Tins Grillo Designs 1 2  

This is where it gets really clever. My husband persuaded me to use a rivet gun for this project rather than using JUST glue as I had originally planned. I’m so glad I listened to him (for a change) , because using rivets turned out to be a much better way to secure the metal pipes against the metal of the baking tins.  (I watched this tutorial on how to use a  rivet gun before  hand –  and thankfully hubby was also around to help!)

The lazy susan mechanism was attached to the underside of baking tin with a rivet gun and rivets (please watch video to see exactly how this was done). We bought a selection of rivets ranging from 3/32” to 3/16”pcs. Choosing the right sized rivets depends on the size of the holes drilled.

Once  flipped over, the inside of the baking pan looked like this

Industrial Tiered Stand From Baking Tins Grillo Designs 1 3

STEP 2: Attach the pipe flanges

You will need a total of 5 iron flanges. 3 of them will go inside the baking pans, and 2 for the underside of each baking tin. 

Place the pipe flange in the center of the 9″ baking pan, mark and drill holes that align with the flange screw holes. 

Industrial Tiered Stand From Baking Tins Grillo Designs 1 4Industrial Tiered Stand From Baking Tins Grillo Designs 1 5

Use 4 rivets to the pre-drilled holes to  secure the flange in place.

Industrial Tiered Stand From Baking Tins Grillo Designs 1 6

You will need to repeat these steps for the two other smaller baking tins.

Industrial Tiered Stand From Baking Tins Grillo Designs 1 8

NOTE: We used this glue to attach the iron flanges to the underside of the two smaller baking tins and left them to bond overnight.

Industrial Tiered Stand From Baking Tins Grillo Designs 1 9

 

STEP 3: Assemble

Once you are happy that all your pipe flanges are secure, all that’s left to do is build the tiered stand. Screw the 150mm pipes into the flange of  the largest pan.

Industrial Tiered Stand From Baking Tins Grillo Designs 1 7

Then screw the underside of the 6″ baking pan to the end of this pipe, and repeat this process with the 4″ pan. When you attach the last pipe, add the pipe cap! You should end up with something like this 

Industrial Tiered Stand Grillo Designs 1 Industrial Tiered Stand Grillo Designs

And thats it! Now you just need to decide what you want to use it for 🙂

Learn to make your own DIY rotating metal tiered tray organizer using upcycled vintage baking tins. Great for organizing craft supplies and decorating. DIY tiered tray tutorial | vintage upcycle | repurpose 

I hope you enjoyed this tutorial. If you have any questions please leave me a comment below! 

Learn to make your own DIY rotating metal tiered tray organizer using upcycled vintage baking tins. Great for organizing craft supplies and decorating. DIY tiered tray tutorial | vintage upcycle | repurpose

 

YOU MIGHT ALSO LIKE:

Printable Agate Patterned Breakfast Tray

Breakfast Serving Tray 1 3

10 Places You Should Be Using Trays in Your Home plus our Favorite Budget-Friendly Trays

(plus check out this two-tiered metal serving tray we used here)

Bagel Buffet Bar Mother's Day 9

DIY Ladder Plant Stand

The post DIY Rotating Metal Tiered Tray Organizer appeared first on Remodelaholic.

http://www.remodelaholic.com/diy-rotating-metal-tiered-tray-organizer/

No comments:

Post a Comment